Cisco Xmodem Download Rating: 3,9/5 1379 reviews
  1. Cisco Xmodem Download Pc
  2. Cisco Xmodem Download Software

A simple and sweet video showing the IOS Image Recovery procedure via xMODEM.To view the full 800x600 resolution video please visit;http://www.freeccnaworkbo. Popcorn time mac dmg.

Error Loading boot image from flash


Loading 'flash:c3750-ipbasek9-mz.122-55.SE7/c3750-ipbasek9-mz.122-55.SE7.bin'..flash:c3750-ipbasek9-mz.122-55.SE7/c3750-ipbasek9-mz.122-55.SE7.bin: no such file or directory
  • Download something like HyperTerminal that support sending files via XModem Connect to the console port of the switch using the Cisco console cable and set your baud rate to 9600 Optional: you may want to 'format flash:' to make sure you have enough free space.
  • If you are connecting to the switch via hyperterminal, power cycle it first and the press ESC in order for your to go to the main menu for the switch and then select download software after that, right click on the hyperterminal screen and then send the.ros file and then select Xmodem as the protocol.
  • Use this xmodem procedure in order to download a Cisco IOS software image onto a Cisco 3600 Series Router. The standard procedure uses the default console speed of 9600 bits per second. Xmodem is a slow transfer protocol, and the transfer of a file as large as a Cisco IOS software image could take an unacceptably long time.

Error loading 'flash:c3750-ipbasek9-mz.122-55.SE7/c3750-ipbasek9-mz.122-55.SE7.bin'
Interrupt within 5 seconds to abort boot process.
Loading 'flash:/c3750-ipbasek9-mz.122-55.SE9.bin'..@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Error loading 'flash:/c3750-ipbasek9-mz.122-55.SE9.bin'
Interrupt within 5 seconds to abort boot process.
Boot process failed..
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
switch:
Download Tera Term and Download device image e.g c3750-ipbasek9-mz.122-55.SE9.bin from Cisco_website
Change Baud rate, both switch and Tera Term for optimum transfer
change Baud rate for optimam transfer, both at switch and Tera Term
switch: set BAUD 57600
Tera Terma
switch: copy xmodem: flash:c3750-ipbasek9-mz.122-55.SE9.bin

Tera Term: File -> Transfer -> Xmodem -> Send and choose the file that you wish the transfer.


It takes many hours to copy

switch: copy xmodem: flash:c3750-ipbasek9-mz.122-55.SE9.bin
Begin the Xmodem or Xmodem-1K transfer now..

Cisco Xmodem Download Pc

C........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ ........................................ .......................................
File 'xmodem:' successfully copied to 'flash:c3750-ipbasek9-mz.122-55.SE9.bin'
switch:
Change BAUD RATE back to normal 9600

switch: set BAUD 9600

switch: boot flash:c3750-ipbasek9-mz.122-55.SE9.bin


switch: boot flash:c3750-ipbasek9-mz.122-55.SE9.bin
Loading 'flash:c3750-ipbasek9-mz.122-55.SE9.bin'..@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ....
File 'flash:c3750-ipbasek9-mz.122-55.SE9.bin' uncompressed and installed, entry point: 0x1000000
executing..
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 12.2(55)SE9, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Mon 03-Mar-14 22:44 by prod_rel_team
Image text-base: 0x01000000, data-base: 0x02D00000
Initializing flashfs..
flashfs[1]: 6 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 12154368
flashfs[1]: Bytes available: 3844608
flashfs[1]: flashfs fsck took 1 seconds.
flashfs[1]: Initialization complete..done Initializing flashfs.
Checking for Bootloader upgrade. not needed
Alternative Cisco Switch Recovery
Xmodem can be used on a group of routers and is used in disaster recovery situations where the router has no valid Cisco IOS software or bootflash image to boot from and hence, only boots up in ROMmon. This procedure can also be used where there are no Trivial File Transfer Protocol (TFTP) servers or network connections, and a direct PC connection (or through a modem connection) to the router's console is the only viable option. Because this procedure relies on the console speed of the router and the serial port of the PC, it can take a long time to download an image. For example, downloading Cisco IOS Software Release 12.1(16) IP Plus image to a Cisco 1600 series router using a speed of 38400 bps takes approximately 25 minutes.

Usage

Here is the command syntax for xmodem.
xmodem [-c] [-y] [-e] [-f] [-r] [-x] [-s border='1' bordercolor='#666666' cellpadding='5' cellspacing='0'>syntaxDescription-c(Optional) CRC-16 checksumming, which is more sophisticated and thorough than standard checksumming. -y(Optional) Uses the Ymodem protocol for higher throughput. -e(Optional) Erases the first partition in Flash memory before starting the download. This option is only valid for the Cisco 1600 series. -f(Optional) Erases all Flash memory before starting the download. This option is only valid for the Cisco 1600 series routers. -r(Optional) Downloads the file to DRAM. The default is Flash memory. -x (Optional) Does not execute the Cisco IOS software image on completion of the download. -s data-rate(Optional) Sets the console port's data rate during file transfer. Values are 1200, 2400, 4800, 9600, 19200, 38400, and 115200 bps. The default rate is specified in the configuration register. This option is only valid for the Cisco 1600 series routers. filename(Optional) Filename to copy. This argument is ignored when the -r keyword is specified since only one file can be copied to DRAM. On the Cisco 1600 series routers, files are loaded to the ROMmon for execution.
Notexmodem options e, f, and s are only supported on the Cisco 1600 series routers. To find out the syntax and available options to use with the xmodem command, type xmodem -? at the ROMmon prompt.
Here's an example of the xmodem command issued on a Cisco 1603 router:
rommon 9 >xmodem -?
usage: xmodem [-cyrxefs]xmodem command issued on a Cisco 2620 router:
rommon 1 >xmodem -?
xmodem: illegal option -- ?
usage: xmodem [-cyrx]
Note The xmodem transfer only works on the console port. You can only download files to the router. You cannot use xmodem to get files from the router.
Note It is also important to note that the -sdata-rate option is only available on the Cisco 1600 series routers and was implemented to overcome the console baud rate limitation of 9600 bps. By specifying -sdata-rate of 115200 bps for example, you can increase the download rate and hence, reduce download time. Other Cisco routers support console speeds up to 115200 bps. Therefore, the -sdata-rate option is not required.
Note Ensure that the PC serial port is using a 16550 universal asynchronous transmitter/receiver (UART) if you're downloading a Cisco IOS software image through the router's console speed at 115200. If the PC serial port is not using a 16550 UART, it is recommended that you use a speed of 38,400 or lower.

Xmodem Procedure for Downloading a Cisco IOS Software Image onto a Cisco 1603 Router

Use the following xmodem procedure to download a Cisco IOS software image onto a Cisco 1603 router.
Step 1 Launch a terminal emulator program.
In the following example, configure Windows HyperTerminal for 8-N-1 at 9600 bps and connect your PC's serial port to the console port of the router. Once connected, you need to get into the ROMmon prompt (rommon 1>). Typically, if the router's Cisco IOS software image and bootflash image are both corrupt, the router only comes up in ROMmon mode. If the former is not true and you need to get into the ROMmon prompt, you need to change the configuration register (typically 0x2102 as given by show version) to 0x0 as follows:
1600#configure term
Enter configuration commands, one per line. End with CNTL/Z.
1600(config)#configure
1600(config)#config-register 0x0
1600(config)#^Z
1600#
00:22:06: %SYS-5-CONFIG_I: Configured from console by console
1600#reload
System configuration has been modified. Save? [yes/no]: n
Proceed with reload? [confirm]
00:22:16: %SYS-5-RELOAD: Reload requested
System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
Simm with parity detected, ignoring onboard DRAM
C1600 platform with 16384 Kbytes of main memory
rommon 1 >
Step 2 From the ROMmon prompt, issue the xmodem command. However, before issuing the xmodem command, ensure that you have the new Cisco IOS software image on your PC.
In this example, all Flash memory is erased before downloading using the f option (only on the Cisco 1600 series). Perform a CRC-16 checksum using the c option and using a download speed of 115200 bps (only on the Cisco 1600 series) by specifying -s115200:
rommon 12 >xmodem -cfs115200 c1600-sy-mz.121-16.bin
Do not start the sending program yet..
Note If the console port is attached to a modem, both the console port and the modem must be operating at the same baud rate.
Use console speed 115200 bps for download [confirm]
File size Checksum File name
1957444 bytes (0x1dde44) 0xe345 c1600-y-mz.113-9.T
Erasing flash at 0x83f0000 no partition 2 on device: PCMCIA slot 1
Ready to receive file c1600-sy-mz.121-16.bin ..
Download will be performed at 115200.
make sure your terminal emulator is set to
this speed before sending file. All existing files in the partition displayed and files in any other partitions on this device will be lost!
Continue ? press 'y' for yes, 'n' for no:y
Step 3 Configure the terminal emulator program for a data rate of 115200 bps to match the xmodem speed specified above. This is done by closing the previous terminal session of 9600 bps and opening a new one at 115200 with 8-N-1. The trick here is that the Cisco 1603 only supports a maximum baud rate of 9600 bps. Therefore, when connecting at 115200 bps, you won't be able to see the router prompt. This is an important point to remember. Once connected to the router at 115200 bps, select Transfer > Send File.. from the HyperTerminal menu bar.
Step 4 Specify the image file name and location and enter xmodem as the Protocol.

Cisco Xmodem Download Software


Figure 2: Send File Dialog
Step 5 Click on Send to start the transfer.
Cisco Xmodem Download
The following message is received when the transfer is complete:
Download Complete!
Returning console speed to 9600
Please reset your terminal emulator to this speed..
Step 6 Per the message above, you need to exit your 115200 bps HyperTerminal session and restart a new one at 9600 bps. Once connected, the router's ROMmon prompt appears. Verify that the download was successful by issuing a dir flash:.
rommon 9 >dir flash:
File size Checksum File name
3686656 bytes (0x384100) 0x1a5e c1600-sy-mz.121-16.bin
Step 7 Change the config register back to 0x2102 and reset or power cycle the router so that the new Cisco IOS software image gets loaded.
rommon 10 >confreg 0x2102
You must reset or power cycle for new config to take effect.
rommon 11 >reset
System Bootstrap, Version 12.0(19981130:173850) [rameshs-120t_lava 114],
DEVELOPMENT SOFTWARE Copyright (c) 1994-1998 by cisco Systems, Inc.
Simm with parity detected, ignoring onboard DRAM
C1600 platform with 16384 Kbytes of main memory
program load complete, entry point: 0x4020060, size: 0x15568c
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
program load complete, entry point: 0x2005000, size: 0x3840e0
Self decompressing the image : ########################################
################